Skip to main content

AngularVelocity

cu29_units::si::f32

Struct AngularVelocity 

Source 
pub struct AngularVelocity(/* private fields */);

Implementations§

Source§

impl AngularVelocity

Source

pub fn new<U>(value: f32) -> Self
where U: Conversion<f32>,

Source

pub fn get<U>(&self) -> f32
where U: Conversion<f32>,

Source

pub fn raw(&self) -> f32

Source

pub fn into_uom(self) -> AngularVelocity

Source

pub fn as_uom(&self) -> &AngularVelocity

Source

pub fn from_uom(inner: AngularVelocity) -> Self

Methods from Deref<Target = AngularVelocity>§

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub const HALF_TURN: Quantity<dyn Dimension<M = Z0, J = Z0, I = Z0, L = Z0, Th = Z0, T = Z0, Kind = dyn AngleKind, N = Z0>, dyn Units<f32, luminous_intensity = candela, thermodynamic_temperature = kelvin, amount_of_substance = mole, electric_current = ampere, mass = kilogram, length = meter, time = second>, f32>

pub const FULL_TURN: Quantity<dyn Dimension<M = Z0, J = Z0, I = Z0, L = Z0, Th = Z0, T = Z0, Kind = dyn AngleKind, N = Z0>, dyn Units<f32, luminous_intensity = candela, thermodynamic_temperature = kelvin, amount_of_substance = mole, electric_current = ampere, mass = kilogram, length = meter, time = second>, f32>

pub const HALF_TURN: Quantity<dyn Dimension<M = Z0, J = Z0, I = Z0, L = Z0, Th = Z0, T = Z0, Kind = dyn AngleKind, N = Z0>, dyn Units<f64, luminous_intensity = candela, thermodynamic_temperature = kelvin, amount_of_substance = mole, electric_current = ampere, mass = kilogram, length = meter, time = second>, f64>

pub const FULL_TURN: Quantity<dyn Dimension<M = Z0, J = Z0, I = Z0, L = Z0, Th = Z0, T = Z0, Kind = dyn AngleKind, N = Z0>, dyn Units<f64, luminous_intensity = candela, thermodynamic_temperature = kelvin, amount_of_substance = mole, electric_current = ampere, mass = kilogram, length = meter, time = second>, f64>

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub const SPHERE: Quantity<dyn Dimension<M = Z0, J = Z0, I = Z0, L = Z0, Th = Z0, T = Z0, Kind = dyn SolidAngleKind, N = Z0>, dyn Units<f32, luminous_intensity = candela, thermodynamic_temperature = kelvin, amount_of_substance = mole, electric_current = ampere, mass = kilogram, length = meter, time = second>, f32>

pub const SPHERE: Quantity<dyn Dimension<M = Z0, J = Z0, I = Z0, L = Z0, Th = Z0, T = Z0, Kind = dyn SolidAngleKind, N = Z0>, dyn Units<f64, luminous_intensity = candela, thermodynamic_temperature = kelvin, amount_of_substance = mole, electric_current = ampere, mass = kilogram, length = meter, time = second>, f64>

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

pub fn get<N>(&self) -> V
where N: Unit + Conversion<V, T = <V as Conversion<V>>::T>,

Retrieve the value of the quantity in the given measurement unit.

§Generic Parameters
  • N: Unit.

Trait Implementations§

Source§

impl Add for AngularVelocity

Source§

type Output = AngularVelocity

The resulting type after applying the + operator.
Source§

fn add(self, rhs: Self) -> Self::Output

Performs the + operation. Read more
Source§

impl AddAssign for AngularVelocity

Source§

fn add_assign(&mut self, rhs: Self)

Performs the += operation. Read more
Source§

impl<'de, Context> BorrowDecode<'de, Context> for AngularVelocity

Source§

fn borrow_decode<D: BorrowDecoder<'de, Context = Context>>( decoder: &mut D, ) -> Result<Self, DecodeError>

Attempt to decode this type with the given BorrowDecode.
Source§

impl Clone for AngularVelocity

Source§

fn clone(&self) -> AngularVelocity

Returns a duplicate of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for AngularVelocity

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl<Context> Decode<Context> for AngularVelocity

Source§

fn decode<D: Decoder<Context = Context>>( decoder: &mut D, ) -> Result<Self, DecodeError>

Attempt to decode this type with the given Decode.
Source§

impl Default for AngularVelocity

Source§

fn default() -> Self

Returns the “default value” for a type. Read more
Source§

impl Deref for AngularVelocity

Source§

type Target = Quantity<dyn Dimension<M = Z0, J = Z0, I = Z0, L = Z0, Th = Z0, T = NInt<UInt<UTerm, B1>>, Kind = dyn AngleKind, N = Z0>, dyn Units<f32, luminous_intensity = candela, thermodynamic_temperature = kelvin, amount_of_substance = mole, electric_current = ampere, mass = kilogram, length = meter, time = second>, f32>

The resulting type after dereferencing.
Source§

fn deref(&self) -> &Self::Target

Dereferences the value.
Source§

impl<'de> Deserialize<'de> for AngularVelocity

Source§

fn deserialize<D>(deserializer: D) -> Result<Self, D::Error>
where D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer. Read more
Source§

impl Div<f32> for AngularVelocity

Source§

type Output = AngularVelocity

The resulting type after applying the / operator.
Source§

fn div(self, rhs: f32) -> Self::Output

Performs the / operation. Read more
Source§

impl DivAssign<f32> for AngularVelocity

Source§

fn div_assign(&mut self, rhs: f32)

Performs the /= operation. Read more
Source§

impl Encode for AngularVelocity

Source§

fn encode<E: Encoder>(&self, encoder: &mut E) -> Result<(), EncodeError>

Encode a given type.
Source§

impl From<AngularVelocity> for AngularVelocity

Source§

fn from(value: AngularVelocity) -> Self

Converts to this type from the input type.
Source§

impl From<Quantity<dyn Dimension<M = Z0, J = Z0, I = Z0, L = Z0, Th = Z0, T = NInt<UInt<UTerm, B1>>, Kind = dyn AngleKind, N = Z0>, dyn Units<f32, luminous_intensity = candela, thermodynamic_temperature = kelvin, amount_of_substance = mole, electric_current = ampere, mass = kilogram, length = meter, time = second>, f32>> for AngularVelocity

Source§

fn from(value: AngularVelocity) -> Self

Converts to this type from the input type.
Source§

impl FromReflect for AngularVelocity

Available on crate feature reflect only.
Source§

fn from_reflect(reflect: &dyn PartialReflect) -> Option<Self>

Constructs a concrete instance of Self from a reflected value.
§

fn take_from_reflect( reflect: Box<dyn PartialReflect>, ) -> Result<Self, Box<dyn PartialReflect>>

Attempts to downcast the given value to Self using, constructing the value using from_reflect if that fails. Read more
Source§

impl GetTypeRegistration for AngularVelocity

Source§

fn get_type_registration() -> TypeRegistration

Returns the default [TypeRegistration] for this type.
§

fn register_type_dependencies(_registry: &mut TypeRegistry)

Registers other types needed by this type. Read more
Source§

impl Mul<f32> for AngularVelocity

Source§

type Output = AngularVelocity

The resulting type after applying the * operator.
Source§

fn mul(self, rhs: f32) -> Self::Output

Performs the * operation. Read more
Source§

impl MulAssign<f32> for AngularVelocity

Source§

fn mul_assign(&mut self, rhs: f32)

Performs the *= operation. Read more
Source§

impl Neg for AngularVelocity

Source§

type Output = AngularVelocity

The resulting type after applying the - operator.
Source§

fn neg(self) -> Self::Output

Performs the unary - operation. Read more
Source§

impl PartialEq for AngularVelocity

Source§

fn eq(&self, other: &AngularVelocity) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
Source§

impl PartialOrd for AngularVelocity

Source§

fn partial_cmp(&self, other: &AngularVelocity) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · Source§

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · Source§

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · Source§

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · Source§

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator. Read more
Source§

impl PartialReflect for AngularVelocity

Source§

fn get_represented_type_info(&self) -> Option<&'static TypeInfo>

Returns the [TypeInfo] of the type represented by this value. Read more
Source§

fn to_dynamic(&self) -> Box<dyn PartialReflect>

Converts this reflected value into its dynamic representation based on its kind. Read more
Source§

fn try_apply(&mut self, value: &dyn PartialReflect) -> Result<(), ApplyError>

Tries to apply a reflected value to this value. Read more
Source§

fn reflect_kind(&self) -> ReflectKind

Returns a zero-sized enumeration of “kinds” of type. Read more
Source§

fn reflect_ref(&self) -> ReflectRef<'_>

Returns an immutable enumeration of “kinds” of type. Read more
Source§

fn reflect_mut(&mut self) -> ReflectMut<'_>

Returns a mutable enumeration of “kinds” of type. Read more
Source§

fn reflect_owned(self: Box<Self>) -> ReflectOwned

Returns an owned enumeration of “kinds” of type. Read more
Source§

fn try_into_reflect( self: Box<Self>, ) -> Result<Box<dyn Reflect>, Box<dyn PartialReflect>>

Attempts to cast this type to a boxed, fully-reflected value.
Source§

fn try_as_reflect(&self) -> Option<&dyn Reflect>

Attempts to cast this type to a fully-reflected value.
Source§

fn try_as_reflect_mut(&mut self) -> Option<&mut dyn Reflect>

Attempts to cast this type to a mutable, fully-reflected value.
Source§

fn into_partial_reflect(self: Box<Self>) -> Box<dyn PartialReflect>

Casts this type to a boxed, reflected value. Read more
Source§

fn as_partial_reflect(&self) -> &dyn PartialReflect

Casts this type to a reflected value. Read more
Source§

fn as_partial_reflect_mut(&mut self) -> &mut dyn PartialReflect

Casts this type to a mutable, reflected value. Read more
§

fn apply(&mut self, value: &(dyn PartialReflect + 'static))

Applies a reflected value to this value. Read more
§

fn reflect_clone(&self) -> Result<Box<dyn Reflect>, ReflectCloneError>

Attempts to clone Self using reflection. Read more
§

fn reflect_clone_and_take<T>(&self) -> Result<T, ReflectCloneError>
where T: 'static, Self: Sized + TypePath,

For a type implementing [PartialReflect], combines reflect_clone and take in a useful fashion, automatically constructing an appropriate [ReflectCloneError] if the downcast fails. Read more
§

fn reflect_hash(&self) -> Option<u64>

Returns a hash of the value (which includes the type). Read more
§

fn reflect_partial_eq( &self, _value: &(dyn PartialReflect + 'static), ) -> Option<bool>

Returns a “partial equality” comparison result. Read more
§

fn debug(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Debug formatter for the value. Read more
§

fn is_dynamic(&self) -> bool

Indicates whether or not this type is a dynamic type. Read more
Source§

impl Reflect for AngularVelocity

Source§

fn into_any(self: Box<Self>) -> Box<dyn Any>

Returns the value as a Box<dyn Any>. Read more
Source§

fn as_any(&self) -> &dyn Any

Returns the value as a &dyn Any. Read more
Source§

fn as_any_mut(&mut self) -> &mut dyn Any

Returns the value as a &mut dyn Any. Read more
Source§

fn into_reflect(self: Box<Self>) -> Box<dyn Reflect>

Casts this type to a boxed, fully-reflected value.
Source§

fn as_reflect(&self) -> &dyn Reflect

Casts this type to a fully-reflected value.
Source§

fn as_reflect_mut(&mut self) -> &mut dyn Reflect

Casts this type to a mutable, fully-reflected value.
Source§

fn set(&mut self, value: Box<dyn Reflect>) -> Result<(), Box<dyn Reflect>>

Performs a type-checked assignment of a reflected value to this value. Read more
Source§

impl Serialize for AngularVelocity

Source§

fn serialize<S>(&self, serializer: S) -> Result<S::Ok, S::Error>
where S: Serializer,

Serialize this value into the given Serde serializer. Read more
Source§

impl Sub for AngularVelocity

Source§

type Output = AngularVelocity

The resulting type after applying the - operator.
Source§

fn sub(self, rhs: Self) -> Self::Output

Performs the - operation. Read more
Source§

impl SubAssign for AngularVelocity

Source§

fn sub_assign(&mut self, rhs: Self)

Performs the -= operation. Read more
Source§

impl TypePath for AngularVelocity

Source§

fn type_path() -> &'static str

Returns the fully qualified path of the underlying type. Read more
Source§

fn short_type_path() -> &'static str

Returns a short, pretty-print enabled path to the type. Read more
Source§

fn type_ident() -> Option<&'static str>

Returns the name of the type, or None if it is anonymous. Read more
Source§

fn crate_name() -> Option<&'static str>

Returns the name of the crate the type is in, or None if it is anonymous. Read more
Source§

fn module_path() -> Option<&'static str>

Returns the path to the module the type is in, or None if it is anonymous. Read more
Source§

impl Typed for AngularVelocity

Source§

fn type_info() -> &'static TypeInfo

Returns the compile-time info for the underlying type.
Source§

impl Copy for AngularVelocity

Source§

impl StructuralPartialEq for AngularVelocity

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
§

impl<T> Downcast for T
where T: Any,

§

fn into_any(self: Box<T>) -> Box<dyn Any>

Converts Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>, which can then be downcast into Box<dyn ConcreteType> where ConcreteType implements Trait.
§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

Converts Rc<Trait> (where Trait: Downcast) to Rc<Any>, which can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.
§

fn as_any(&self) -> &(dyn Any + 'static)

Converts &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.
§

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Converts &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.
§

impl<T> DowncastSend for T
where T: Any + Send,

§

fn into_any_send(self: Box<T>) -> Box<dyn Any + Send>

Converts Box<Trait> (where Trait: DowncastSend) to Box<dyn Any + Send>, which can then be downcast into Box<ConcreteType> where ConcreteType implements Trait.
§

impl<T> DynamicTypePath for T
where T: TypePath,

§

fn reflect_type_path(&self) -> &str

See [TypePath::type_path].
§

fn reflect_short_type_path(&self) -> &str

See [TypePath::short_type_path].
§

fn reflect_type_ident(&self) -> Option<&str>

See [TypePath::type_ident].
§

fn reflect_crate_name(&self) -> Option<&str>

See [TypePath::crate_name].
§

fn reflect_module_path(&self) -> Option<&str>

See [TypePath::module_path].
§

impl<T> DynamicTyped for T
where T: Typed,

§

fn reflect_type_info(&self) -> &'static TypeInfo

See [Typed::type_info].
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> GetPath for T
where T: Reflect + ?Sized,

§

fn reflect_path<'p>( &self, path: impl ReflectPath<'p>, ) -> Result<&(dyn PartialReflect + 'static), ReflectPathError<'p>>

Returns a reference to the value specified by path. Read more
§

fn reflect_path_mut<'p>( &mut self, path: impl ReflectPath<'p>, ) -> Result<&mut (dyn PartialReflect + 'static), ReflectPathError<'p>>

Returns a mutable reference to the value specified by path. Read more
§

fn path<'p, T>( &self, path: impl ReflectPath<'p>, ) -> Result<&T, ReflectPathError<'p>>
where T: Reflect,

Returns a statically typed reference to the value specified by path. Read more
§

fn path_mut<'p, T>( &mut self, path: impl ReflectPath<'p>, ) -> Result<&mut T, ReflectPathError<'p>>
where T: Reflect,

Returns a statically typed mutable reference to the value specified by path. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

§

impl<A> Is for A
where A: Any,

§

fn is<T>() -> bool
where T: Any,

Checks if the current type “is” another type, using a TypeId equality comparison. This is most useful in the context of generic logic. Read more
Source§

impl<P, T> Receiver for P
where P: Deref<Target = T> + ?Sized, T: ?Sized,

Source§

type Target = T

🔬This is a nightly-only experimental API. (arbitrary_self_types)
The target type on which the method may be called.
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> Serialize for T
where T: Serialize + ?Sized,

Source§

fn erased_serialize(&self, serializer: &mut dyn Serializer) -> Result<(), Error>

Source§

fn do_erased_serialize( &self, serializer: &mut dyn Serializer, ) -> Result<(), ErrorImpl>

Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<T> TypeData for T
where T: 'static + Send + Sync + Clone,

§

fn clone_type_data(&self) -> Box<dyn TypeData>

Creates a type-erased clone of this value.
Source§

impl<T> DeserializeOwned for T
where T: for<'de> Deserialize<'de>,

§

impl<T> Reflectable for T
where T: Reflect + GetTypeRegistration + Typed + TypePath,